A model from “PRO TREK” equipped with “Triple Sensor Ver.3.”
Altitude measurement interval is 1 second (only for the first 3 minutes), measurement unit is 1 m, and the continuous directional measurement time is 60 seconds due to the power-saving sensor. Combining these measurement functions with basic performance functions such as Tough Solar and 10 ATM water resistance, creates a design that can withstand use in harsh outdoor scenarios where circumstances change from one minute to the next.
It is also equipped with large direct buttons that enable function measurements via a single push even with gloves on to enhance practicality.
It is further equipped with a barometric pressure trend information alarm function that sounds an alarm when there is a noticeable change in barometric pressure based on past barometric pressure trend analysis. It can quickly grasp changes in atmospheric pressure that are difficult to notice.
PRG-270-1A
Out of stock
Description
Case size (L× W× H)
54.6 × 52.4 × 15 mm
Weight
67 g
Case and bezel material
Resin
Band
Resin Band
Water resistance
100-meter water resistance
Environmental resistance
Low-temperature resistant (-10℃/14℉)
Power supply and battery life
Solar powered
Sensor feature
Altimeter Measuring range: -700 to 10,000 m (-2,300 to 32,800 ft.) Measuring unit: 1 m (5 ft.) Manual memory measurements (up to 30 records, each including altitude, date, time) Auto log data (High/low altitudes, auto cumulative ascent and descent) Trek log data (up to 14 records of high/low altitudes, auto cumulative ascent and descent of particular treks) Others: Relative altitude readings (-3,000 to 3,000 m), Selectable measurement interval: 5 seconds or 2 minutes *1 second for first 3 minutes only *Changeover between meters (m) and feet (ft)
Barometer Display range: 260 to 1,100 hPa (7.65 to 32.45 inHg) Display unit: 1 hPa (0.05 inHg) Atmospheric pressure tendency graph (past 42 hours of readings) Atmospheric pressure differential graphic Barometric pressure tendency information alarm (beep and arrow indicate significant changes in pressure) *Changeover between hPa and inHg
Digital compass Measures and displays direction as one of 16 points Measuring range: 0 to 359° Measuring unit: 1° 60 seconds continuous measurement Graphic direction pointer Bidirectional calibration Magnetic declination correction Bearing memory
Thermometer Display range: -10 to 60℃ (14 to 140℉) Display unit: 0.1℃ (0.2℉) *Changeover between Celsius (℃) and Fahrenheit (℉)
Glass
Mineral Glass
World time
World time 31 time zones (48 cities + coordinated universal time), daylight saving on/off
Sunrise/sunset display
Sunrise, sunset time display Sunrise time and sunset time for specific date, daylight pointers
Stopwatch
1/10-second stopwatch Measuring capacity: 999:59’59.9” Measuring modes: Elapsed time, split time, 1st-2nd place times
Timer
Countdown timer Measuring unit: 1 second Countdown range: 24 hours Countdown start time setting range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
Alarm/hourly time signal
5 daily alarms (with 1 snooze alarm)
Hourly time signal
Light
LED backlight (Super Illuminator) Full auto LED light, selectable illumination duration, afterglow
Light color
LED:White
Calendar
Full auto-calendar (to year 2099)
Mute feature
Button operation tone on/off
Energy saving feature
Power Saving (display goes blank to save power when the watch is left in the dark)
Battery display/alert
Battery level indicator
Run time
Approx battery operating time: 9 months on rechargeable battery (operation period with normal use without exposure to light after charge) 24 months on rechargeable battery (operation period when stored in total darkness with the power save function on after full charge)
Accuracy
Accuracy: ±15 seconds per month
Other features
12/24-hour format
Regular timekeeping: Hour, minute, second, pm, year, month, date, day
